Equipment list
What's on our shop floor.
Machine sizes and capacities, so you can tell at a glance whether your part fits. If you're not sure, send the print and we'll tell you.
Wire EDM
8 machines · climate-controlled room
| Machine | Qty | Largest travels (X × Y × Z) | Notes |
|---|---|---|---|
| Wire EDM | 8 | 15.7" × 11.8" × 9.8" (400 × 300 × 250 mm) |
4-axis / taper cutting · climate-controlled room |
Swiss turning
3 machines
| Machine | Qty | Largest bar diameter | Notes |
|---|---|---|---|
| Swiss-type CNC lathe | 3 | 1.25" (32 mm) | Small, complex turned parts |
Milling & conventional turning
6 CNC mills · 10 CNC lathes
| Machine | Qty | Largest capacity | Notes |
|---|---|---|---|
| CNC vertical mill | 6 | 30" × 16" × 20" (X × Y × Z) |
4th axis |
| 2-axis CNC lathe | 10 | 10" dia. × 14" length |
Grinding
8 surface · 1 centerless
| Machine | Qty | Capacity | Notes |
|---|---|---|---|
| Surface grinder | 8 | 6" × 18" table | |
| Centerless grinder | 1 | Up to approx. 2" diameter |
Heat treat & finishing
Done in-house
- Heat treatingParts are hardened here, so they don't leave the shop between machining and finishing.
- Laser etchingPermanent part numbers, serial numbers, lot codes and logos.
- TumblingDeburring and edge breaking for batches of small parts.
- Sand blastingAn even matte finish, or surface prep before coating.
- BlackeningA black oxide finish for mild corrosion resistance and a uniform appearance.
Inspection
Fully enclosed, temperature-controlled room
Finished parts are measured in a fully enclosed inspection room held at a controlled temperature. Steel grows and shrinks with heat, so measuring in a stable room gives readings you can trust, whatever the weather is doing on the shop floor.
Not sure your part fits?
Send the print. We'll tell you which machine it runs on, or tell you straight if it doesn't.